3D Designs
My 3D Design
此设计是我在购买无线领夹麦克风的时候产生的想法，然和我就开始设计。我开始有想各种不同的形态，最终在瞎玩XLR接头的时候发觉可以卡在这个环这里。这个设计中需要使用NEUTRIK 或者 Jiasound 的XLR接头，可能其他的也可以支持你可以在Comment告诉我。
I started thinking about different forms and finally found this stuck in the ring when I was playing around with the XLR interface. You need to use NEUTRIK or Jiasound XLR connectors in the design. Maybe others can also work, you can tell me in the comments.
GH5和S1H适配的遮光罩，在这个设计需要硅胶条，GH5需要用1mm厚10mm宽的，S1H需要2MM厚10mm宽的胶条。
This is a hood for GH5 and S1H. In this design, a rubber strips is needed. For GH5, a 1mm thick and 10mm wide strip is needed. S1H needs a 2mm thick and 10mm wide strip.
小米屏幕挂灯罗技C270的支架，解决了屏幕上挂了屏幕挂灯后无法挂摄像的问题。设计需要是用M3螺丝和M3注塑螺帽，如果嫌麻烦也可以用扎带。
This is the support of the Logitech C270 for the Xiaomi Mi ScreenBar. The design needs to use M3 screws and M3 injection nuts, if you find it troublesome, you can also use cable ties.
这是给Sennheiser XSW-D制作的1/4冷靴座，原版的价格比较贵。 This is a 1/4 cold shoe made for Sennheiser XSW-D. The original version is bit expensive.
这是给sennheiser G4使用的背板，需要1/4的热塑螺母。原版的价格比较贵。
This is the backplate for sennheiser G4 and requires 1/4 of the injection nuts. The original version is bit expensive.
最后更新于
这有帮助吗？